Customer Service: 1-855-COMPDIR (266-7347) M-F 9am–6pm Pacific

Welcome to Components Direct!

My Cart (0)

Micrel MICRF008YM, OOK RF Receiver IC

Image displayed is for
representation only. See
product details for exact
specifications.

Micrel MICRF008YM, OOK RF Receiver IC

The Micrel MICRF008YM is a OOK RF Receiver IC. It is a single-chip receiver IC designed for remote wireless applications. This device is a true single-chip, "antenna-in, data-out" device, and it is easy to implement. MICRF008 receiver requires very few peripheral passive components. All tunings, RF and IF, are accomplished within the IC. Ease of use and minimal parts count translate to cost savings and shorter time to market. MICRF008 receiver offers a robust and low-cost solution for high volume wireless applications. The MICRF008 sweeps the internal local oscillator at rates greater than the baseband data rate. This effectively broadens the RF bandwidth of the receiver to a value equivalent to conventional superregenerative receivers. This allows the MICRF008 to operate with less expensive LC transmitters without additional components or tuning, even though the receiver topology is still superheterodyne. In this mode the reference crystal can be replaced with a less expensive ±0.5% ceramic resonator. Since all post-detection (demodulator) data filtering is provided on the MICRF008, no external IF filters are required. One of the two internal filter bandwidths must be externally selected based on data rate and code modulation format.
Manufacturer Micrel
Part No. MICRF008YM
Manufacturer Micrel
Manufacturer Part Number MICRF008YM
Manufacturer Base Part Number MICRF008
Packaging Tube
Other Names 576-1961-5MICRF008YM-ND
RoHS Status See Datasheet
Title MICRF008 QwikRadio™ Sweep-Mode Receiver
Antenna Connector PCB, Surface Mount
Data Rate (Max) 4.8kb/s
Frequency 300MHz to 440MHz
Lead Free Status Lead Free
Modulation OOK
Operating Temperature -40°C to 85°C
Receiving Current 7mA
Sensitivity -95dBm
Supply Voltage 4.75V to 5.5V

The Micrel MICRF008YM is a OOK RF Receiver IC. It is a single-chip receiver IC designed for remote wireless applications. This device is a true single-chip, "antenna-in, data-out" device, and it is easy to implement. MICRF008 receiver requires very few peripheral passive components. All tunings, RF and IF, are accomplished within the IC. Ease of use and minimal parts count translate to cost savings and shorter time to market. MICRF008 receiver offers a robust and low-cost solution for high volume wireless applications. The MICRF008 sweeps the internal local oscillator at rates greater than the baseband data rate. This effectively broadens the RF bandwidth of the receiver to a value equivalent to conventional superregenerative receivers. This allows the MICRF008 to operate with less expensive LC transmitters without additional components or tuning, even though the receiver topology is still superheterodyne. In this mode the reference crystal can be replaced with a less expensive ±0.5% ceramic resonator. Since all post-detection (demodulator) data filtering is provided on the MICRF008, no external IF filters are required. One of the two internal filter bandwidths must be externally selected based on data rate and code modulation format.

  • 300MHz to 440MHz frequency range
  • Automatic tuning
  • no manual adjustment
  • CMOS logic interface for standard ICs
  • Complete UHF receiver on a monolithic chip
  • Low external part count
  • Manufacturability and same performance over the years
  • Replaces superregenerative receivers design
  • Up to 4.8kbps data rate.
  • Very low RF antenna reradiation
  • Very small PCB area required
Add Item to Your Cart
$2.49
Minimum qty 1
Inventory Details
Part No. MICRF008YM
Quantity 142
Availability: In stock
Packaging Tube

For pricing on larger volumes,
please call 408.503.7770
or email sales@componentsdirect.com
for special quotes.