Customer Service: 1-855-COMPDIR (266-7347) M-F 9am–6pm Pacific

Welcome to Components Direct!

My Cart (0)

Maxim DS2119ME/T&R/C08, 9 Differential and 9 Single Ended SCSI Termination IC

Image displayed is for
representation only. See
product details for exact
specifications.

Maxim DS2119ME/T&R/C08, 9 Differential and 9 Single Ended SCSI Termination IC

The Maxim DS2119ME/T&R/C08 is a 9 Differential and 9 Single Ended SCSI Termination IC.The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line. For the LVD termination, the DS2119M integrates two current sources with nine precision resistorstrings. Three DS2119M terminators are needed for a wide SCSI bus.
Manufacturer Maxim
Part No. DS2119ME/T&R/C08
Manufacturer Maxim
Manufacturer Part Number DS2119ME/T&R/C08
Manufacturer Base Part Number DS2119M
Package Type TSSOP-28
Data Sheet DS2119ME/T&R/C08 Datasheet
RoHS Compliance See Datasheet
Title Ultra3 LVD/SE SCSI Terminator
Differential/Single-Ended Input 9 Differential and 9 Single Ended
Interface Standards Ultra 160 or Ultra 320 or Ultra2 SCSI or Ultra3 SCSI
Lead Free Compliance See Datasheet
Operating Temperature 0°C to 70°C
Termination Resistance Tolerance 5%

The Maxim DS2119ME/T&R/C08 is a 9 Differential and 9 Single Ended SCSI Termination IC.The DS2119M Ultra3 LVD/SE SCSI terminator is both a low-voltage differential (LVD) and single-ended (SE) terminator. The multimode operation enables the designer to implement LVD in current products while allowing the end-user SE-backward compatibility with legacy devices. If the device is connected in an LVD-only bus, the DS2119M will use LVD termination. If any SE devices are connected to the bus, the DS2119M will use SE termination. This is accomplished automatically inside the part by sensing the voltage on the SCSI bus DIFFSENS line. For the LVD termination, the DS2119M integrates two current sources with nine precision resistorstrings. Three DS2119M terminators are needed for a wide SCSI bus.

  • 5% Tolerance on SE and LVD Termination Resistance
  • Autoselection of LVD or SE Termination
  • Differential/Single-Ended (LVD/SE)
  • Fully Compliant with SCSI SPI-2
  • SPI-3
  • SPI-4
  • Ultra160
  • and Ultra320
  • Fully Supports Actively Negated SE SCSI Signals
  • Low Power-Down Capacitance of 3pF
  • On-Board Thermal Shutdown Circuitry
  • Provides Multimode Low-Voltage
  • SCSI Bus Hot Plug Compatible
  • Termination for Nine Signal Line Pairs
Inventory Details
Part No. DS2119ME/T&R/C08
Quantity 0
Availability Out of stock
Packaging

For pricing on larger volumes,
please call 408.503.7770
or email sales@componentsdirect.com
for special quotes.